CWNA-109 Exam Questions & Answers

A common problem that causes this scenario iscaptive portal issues. A captive portal is a web page that requires users to authenticate or accept terms and conditions before accessing the Internet through a WLAN. A captive portal is often used for guest networks to provide security and control over the network access. A captive portal works by intercepting the user's web requests and redirecting them to the portal page until the user completes the required action. However, sometimes the captive portal may not work properly due to various reasons, such as browser settings, firewall rules, DNS configuration, or network errors. This can prevent the user from browsing the Internet or seeing the portal page. To troubleshoot captive portal issues, you can try to use a different browser, clear the browser cache and cookies, disable any VPN or proxy settings, manually enter the portal URL, or contact the network administrator. NTP issues, hardware issues, or IP routing issues are not common problems that cause this scenario.Reference:[CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 343; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 333.

A VoIP phone is least likely to be a POE PSE of the devices listed. POE stands for Power over Ethernet, which is a technology that allows devices to receive both power and data over a single Ethernet cable. A POE PSE stands for Power Sourcing Equipment, which is a device that provides power to other devices over Ethernet. A POE PD stands for Powered Device, which is a device that receives power from a PSE over Ethernet. A midspan multi-port injector, a switch, and a midspan injector are examples of POE PSEs, as they can supply power to multiple devices over Ethernet cables. A VoIP phone is an example of a POE PD, as it can receive power from a PSE over an Ethernet cable.However, some VoIP phones can also act as POE PSEs for other devices, such as IP cameras or wireless access points, but this is not very common.Reference:CWNA-109 Study Guide, Chapter 8: Wireless LAN Access Points, page 2411

The term used to describe the problem in this configuration is Co-Channel Interference (CCI)1.CCI occurs when multiple access points are on the same or overlapping channels, causing interference and degradation in network performance1.In this case, one AP is on channel 1 and the other is on channel 2, which are overlapping channels, leading to CCI1.

Based on the information given, what can be determined as certainly true about this AP is thatit has 4 radio chains. A radio chain is a hardware component that consists of an antenna, a radio frequency (RF) amplifier, and a transceiver. The number of radio chains indicates how many spatial streams an AP can transmit or receive simultaneously using Multiple Input Multiple Output (MIMO) technology. The notation x:y:z in an AP specification denotes the number of radio chains (x), the number of spatial streams (y), and the number of spatial streams per band (z). Therefore, a tri-band, 4x4:4, Wi-Fi 6, 802.11ax AP has four radio chains in each of its three bands (2.4 GHz, low 5 GHz, and high 5 GHz). It also supports four spatial streams in total and four spatial streams per band. It cannot be determined as certainly true that it supports four channels in each band, UL-MU-MIMO, or uses a modified OpenWRT firmware based on the information given.Reference:[CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 223; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 213.