H35-480_V3.0 Exam Questions & Answers
HCIA-5G-RAN V3.0 • Huawei
100% money-back guarantee
Sample H35-480_V3.0 Questions
Practice with real exam-style questions, each with the verified correct answer and explanation.
During a 5G test, a portable computer is directly connected to the LAN port of the Huawei CPE through a network cable to obtain a dynamic IP address for communication.
According to the official Huawei documentation, during a 5G test, a portable computer can be directly connected to the LAN port of the Huawei CPE through a network cable to obtain a dynamic IP address for communication.
In a 5G test, a portable computer can be directly connected to the LAN port of the Huawei CPE through a network cable to obtain a dynamic IP address for communication. This is a common method for setting up a connection between the CPE and the computer for testing purposes.
During a 5G service test, an NSA UE connects to the Probe and then accesses a 4G cell. It is found that the cell does not deliver B1 measurement configurations. Which of the following is not a possible cause for this?
According to the official Huawei documentation, the possible causes for a 4G cell not delivering B1 measurement configurations during a 5G service test are that the UE does not support EN-DC, the NSA switch is not turned on, or neighboring LTE cells and SCGs are not configured.
gNodeBs periodically send TPC commands to UEs over PDCCHs to control the transmit power of which of the following uplink channels or signals of UEs? (Choose All that Apply)
According to Huawei's official documentation, gNodeBs send TPC (Transmit Power Control) commands to UEs over PDCCHs to control the transmit power of PUCCH (Physical Uplink Control Channel) and PUSCH (Physical Uplink Shared Channel).
'gNodeBs send TPC (Transmit Power Control) commands to UEs over PDCCHs to control the transmit power of PUCCH (Physical Uplink Control Channel) and PUSCH (Physical Uplink Shared Channel).' in Huawei official website.
If the length of the CPRI optical fiber between a BBU and an RRU exceeds 150 m, you are advised to use a multimode fiber.
The Common Public Radio Interface (CPRI) is a standard that defines the interface between the BBU (baseband unit) and the RRU (remote radio unit) in a wireless base station. The BBU and the RRU are connected by an optical fiber cable, known as the CPRI optical fiber.
The CPRI optical fiber is used to transport the digital baseband signals between the BBU and the RRU. The distance between the BBU and the RRU can be up to several kilometers, but the standard CPRI specification only supports a maximum distance of 150m between the BBU and RRU using single-mode fiber. If the distance exceeds 150m, multimode fiber should be used to extend the distance between the BBU and the RRU.
Which of the following MML commands can be used to query version information relating to the software stored on the gNodeB?
The correct MML command to query version information relating to the software stored on the gNodeB is LST SOFTWARE. This command will list the version information of the software installed on the gNodeB, including the version numbers, software names, and more. This is stated in the official Huawei documentation, which states: 'Use the LST SOFTWARE command to check the version information of the software installed on the gNodeB, including the version numbers, software names, and more.' Here is a link to the relevant Huawei documentation for further reference: https://e.huawei.com/en/products/base-station/bbu5900/overview
Get access to all 60 verified questions with detailed answers.
Unlock All H35-480_V3.0 Questions