What is the HPE7-A01 certification exam?

The HPE7-A01 is the Aruba Certified Campus Access Professional exam offered by HP/HPE. This certification validates expertise in designing, deploying, and managing Aruba campus access solutions and network infrastructure.

What are the main topics covered in the HPE7-A01 exam?

The exam covers Aruba campus access architecture, switching fundamentals, VLAN configuration, security protocols, wireless networking basics, and network management. It also includes topics on AOS-Switch operating system, authentication methods, and campus network best practices.

What is the passing score for the HPE7-A01 exam?

Candidates typically need to achieve a score of 70% or higher to pass the HPE7-A01 exam. The exact passing score may vary, so it's recommended to check the official HPE certification website for the most current requirement.

How long is the HPE7-A01 exam and how many questions are there?

The HPE7-A01 exam is generally 90 minutes in duration with approximately 60-70 multiple choice questions. The exact number of questions and time allocation may vary based on the current exam version.

What experience level is required to take the HPE7-A01 exam?

While there are no strict prerequisites, HPE recommends having practical experience with Aruba campus access solutions and networking fundamentals before attempting this exam. Most candidates have 1-2 years of hands-on experience with network switching and campus infrastructure.

Free HPE7-A01 Exam Questions

Q1 MultipleChoice

When setting up an AOS-CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?

Adead interval is disabled by default

Bdead interval is based on the value set for hello interval

Cdead interval is 200ms by default

Ddead interval is 20s by default

Correct Answer: D

Q2 MultipleChoice

You are proposing new CX 8360 VSX switches to replace a customers existing core switches. The customer Is concerned about the possibility of a split-brain scenario between the VSX pair. How Is the VSX pair affected when the ISL is down 3nd keepalive is down?

AThe VSX node with lower system-id continues forwarding.

BBoth VSX nodes will automatically reboot and keep LAG interfaces shutdown.

CBoth VSX nodes still forward tame

DThe VSX node with higher uptime continues forwarding.

Correct Answer: C

Q3 MultipleChoice

A customer wants to provide wired security as close to the source as possible The wired security must meet the following requirements:

-allow ping from the IT management VLAN to the user VLAN

-deny ping sourcing from the user VLAN to the IT management VLAN

The customer is using Aruba CX 6300s

What is the correct way to implement these requirements?

AApply an outbound ACL on the user VLAN allowing temp echo-reply traffic toward the IT management VLAN

BApply an inbound ACL on the user VLAN allowing icmp echo-reply traffic toward the IT management VLAN

CApply an inbound ACL on the user VLAN denying icmp echo traffic toward the IT management VLAN

DApply an outbound ACL on the user VLAN denying icmp echo traffic toward the IT management VLAN

Correct Answer: C

Explanation:

An inbound ACL is applied to traffic entering a port or VLAN.An outbound ACL is applied to traffic leaving a port or VLAN4. To deny ping sourcing from the user VLAN to the IT management VLAN, an inbound ACL on the user VLAN should be used to filter icmp echo traffic toward the IT management VLAN.Icmp echo-reply traffic is not needed to be allowed because it is already permitted by default5. Reference:4https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-9B8F6E8F-9C7A-4F0D-AE7B-9D8E6C5B6A7F.html5https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-0C3A9D0F-6E5B-4E1A-AF3C-8D8B2F9C1A7B.html

Q4 MultipleChoice

You need to drop excessive broadcast traffic on an ingress port or an ArubaOS-CX switch. What is the best feature to use for this task?

ADWRR queuing

BStrict queuing

CRate limiting

DQoS shaping

Correct Answer: C

Explanation:

According to the Aruba Documentation Portal1, the ArubaOS-CX switch supports various features to control the ingress traffic on specific ports, such as rate limiting, QoS shaping, and access control. These features can help reduce the impact of excessive broadcast traffic on the network performance and availability.

This is because rate limiting is a feature that allows you to limit the inbound or outbound traffic on a port based on a percentage of the port capacity or a fixed amount of bytes per second.Rate limiting can help prevent broadcast storms by reducing the amount of broadcast packets that enter or leave a port

https://www.arubanetworks.com/techdocs/central/latest/content/nms/aos-cx/cfg/conf-cx-access-control.htm2: https://community.arubanetworks.com/blogs/esupport1/2021/02/08/broadcast-storm-containment-in-aruba-pvos-switches3: https://techhub.hpe.com/eginfolib/networking/docs/switches/K-KA-KB/15-18/5998-8160_ssw_mcg/content/ch05.html

Q5 MultipleChoice

In an AOS-10 architecture using an AP. a gateway and traffic forwarding mode * mixed, what happens when a client connects to an open enhanced 5SID where their VLAN assignment will be bridged?

AAuthenticated Diffie-Hellman is not utilized

BRADIUS protocol is utilized.

CNo encryption is applied.

DThe gateway will not respond.

Correct Answer: A

HPE7-A01 Exam Questions & Answers

Sample HPE7-A01 Questions

Frequently Asked Questions

Pass HPE7-A01 First Time