4A0-220 Exam Questions & Answers

A Nominal Route in a GMPLS network is the optimal path that meets the Traffic Engineering (TE) constraints for a given LSP request. A Nominal Route is calculated by the NFM-T using the Constrained Shortest Path First (CSPF) algorithm, which takes into account parameters such as bandwidth, latency, priority, protection type, and other QoS attributes. A Nominal Route is stored in the NFM-T database and can be used to provision LSPs over the network. A Nominal Route can differ from the Current Route, which is the actual path that the LSP is taking at a given time, due to network changes or failures.Reference:Nokia GMPLS-controlled Optical Networks Course | Nokia,Nokia Advanced Optical Network Management with NFM-T Course | Nokia

The Feasibility File is a file that contains a set of target values for various optical impairment parameters, such as OSNR, CD, PMD, and PDL, that are used to determine whether a given LSP can be routed through the GMRE network. The Feasibility File is generated by the Network Planning Application (NPA) based on the network design and the service requirements. The Feasibility File is then loaded into the GMRE nodes and used by the GMPLS routing engine to perform feasibility checks for LSP requests.The Feasibility File ensures that the LSPs are routed in accordance with the network plan and the optical performance criteria12.Reference:

1: Nokia GMPLS-controlled Optical Networks Course | Nokia

2: GMPLS - Nokia

A Label Switched Path (LSP) is the path created by MPLS nodes that use labels to forward packets across the network. A label is a short identifier that is attached to each packet and indicates the next hop or destination of the packet. The nodes use a label forwarding table to switch packets based on their labels, without inspecting the packet headers. This can improve the performance, security, and quality of service of the network. An LSP can be established by using GMPLS protocols such as OSPF-TE and RSVP-TE, which exchange information about the network topology, resources, and constraints.Reference:Nokia GMPLS-controlled Optical Networks Course | Nokia,GMPLS - Nokia

The GMRE notify address is an IP address used to signal failures on downstream nodes upstream to the head node. The GMRE notify address is configured on each GMRE node and is used to send a Notify message to the head node when a failure occurs on a link or node along the LSP. The Notify message contains the failure information and the LSP ID. The head node can then initiate a restoration process based on the Notify message.Reference:Nokia GMPLS-controlled Optical Networks Course | Nokia,GMPLS - Nokia

Quality of Service (QoS) in GMPLS is the ability to set constraints such as latency and priority for different kinds of services. This means that GMPLS can allocate network resources according to the specific requirements of each service, such as voice, video, or data. For example, a voice service may need low latency and high priority, while a data service may need high bandwidth and low priority. GMPLS can use Traffic Engineering (TE) extensions to OSPF and RSVP protocols to advertise and reserve network resources based on QoS parameters.Reference: [Nokia GMPLS-controlled Optical Networks Course | Nokia], [Quality of Service - Nokia]