HPE7-A02 Exam Questions & Answers

When Wireless IDS/IPS infrastructure detection reports RTS (Request to Send) and CTS (Clear to Send) rate anomalies triggered by neighboring APs, it is often an indication of unusual, but not necessarily malicious, behavior. These anomalies can be caused by neighboring APs operating normally but under specific conditions that trigger the alerts. Before assuming a security threat, it is recommended to tune the event thresholds to better match the environment and reduce false positives. This approach helps to distinguish between normal operations and potential DoS attacks.

Traffic Forwarding for APs:

In AOS-10, AP traffic forwarding can happen locally (bridged) or through tunnels to a gateway.

The VLAN settings on the 'APs' role depend on whether the APs bridge the SSID traffic locally or forward it through a tunnel.

Option B: Correct. You need to know whether the traffic is bridged or tunneled to determine the VLAN assignments.

Option A: Incorrect. LURs/DURs affect role assignment but not VLAN settings for traffic forwarding.

Option C: Incorrect. Establishing tunnels with gateways is relevant to centralized traffic forwarding, not VLANs for bridged traffic.

Option D: Incorrect. AP IP addressing (static or DHCP) does not impact the VLAN for forwarded SSID traffic.

Integrating HPE Aruba Networking ClearPass Policy Manager (CPPM) and HPE Aruba Networking ClearPass Device Insight (CPDI) can help a company implement Zero Trust Security by allowing CPDI to use tags to inform CPPM that clients are using prohibited applications. CPPM can then take action, such as telling the network infrastructure to quarantine those clients, ensuring that only compliant and trusted devices have network access.

1.Device Insight Tags: CPDI can monitor client behavior and tag devices that are using prohibited applications.

2.Policy Enforcement: CPPM can use these tags to apply specific enforcement actions, such as quarantining non-compliant devices.

3.Zero Trust Implementation: This integration supports Zero Trust Security by ensuring that all devices are continuously monitored and controlled based on their behavior and compliance with security policies.

To simplify the setup of 802.1X authentication with HPE Aruba Networking ClearPass Policy Manager (CPPM) and ensure clients are steered to the correct VLANs for local forwarding, you should assign consistent names to VLANs of the same type across the AOS-CX switches and have user-roles reference these names. This approach allows for a more straightforward configuration and management process, as the user roles can apply consistent policies based on VLAN names rather than specific IDs. It also helps in maintaining clarity and reducing errors in VLAN assignments across different switches.

The requirement describes split tunneling. Internet-bound traffic should remain local at the remote client, while traffic destined for corporate data center networks should traverse the VPN tunnel. In Aruba VIA, this behavior is configured in the VIA Connection Profile by enabling split tunneling and defining which destination networks should be tunneled. Adding the data center networks to the tunneled networks list ensures only those corporate routes are sent through the VPN. Firewall roles control access permissions after authentication, but they are not the primary place to define the VIA client's split-tunnel routing behavior. VPN pools assign client IP addresses, not destination routing rules. Therefore, split tunneling in the VIA Connection Profile is the correct configuration.